2.8 Mfi Injectors

Discussion in 'Capri Chit Chat' started by Stroker, 30 June 2015.

  1. Stroker

    Stroker Registered Capri Power Member

    Joined:
    28 April 2014
    Messages:
    314
    Location:
    N.Z
    Drives:
    Sierra Ghia Estate 4x4
    Has anyone tried MFI injectors out of a XR3i in a 2.8?
    Curious to hear how they went. They look shorter than the 2.8 injector and in theory this should pull the injector out of a critical area of the 2.8 inlet port.
     
  2. 2.8jonny

    2.8jonny Registered Capri Power Member

    Joined:
    4 August 2009
    Messages:
    2,224
    Location:
    Kernow
    Drives:
    1983 2.8 injection
    They are shorter, I wonder what flow rates are like and if the fuel will hit the ports rather than valves. Think I remember a classic ford article when a tuner used an efi manifold and plenum with capri kjet and xr3i injectors.
    Are you looking for some more horses?
    Jon
     
  3. Stroker

    Stroker Registered Capri Power Member

    Joined:
    28 April 2014
    Messages:
    314
    Location:
    N.Z
    Drives:
    Sierra Ghia Estate 4x4
    Always looking for more horses :thumbup1: Flow rates might be a problem I don't know. I can't see the spray pattern will be a problem.
    Was hoping someone had tried them and could shed some light on the results, good or bad.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice